Altium

Design Rule Verification Report

Date:		5/8/2018
Time:		12:39:54 PM
Elapsed Time:		00:00:00
Filename:		R:\BOARDS\MEMS Adapter DIL24\ACC\MS 2X2D12 GR Rev1.0\STEVAL\MKI191V1\STEVAL-MKI191V1.PcbDoc

Warnings:		0
Rule Violations:		9

Summary

Warnings	Count
Total	0

Rule Violations	Count
Clearance Constraint (Gap=0.25mm) (InNet('GND')),(All)	7
Short-Circuit Constraint (Allowed=No) (All),(All)	0
Un-Routed Net Constraint ( (All) )	0
Clearance Constraint (Gap=0.12mm) (All),(All)	2
Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.4mm) (Air Gap=0.25mm) (Entries=4) (All)	0
Width Constraint (Min=0.15mm) (Max=5mm) (Preferred=0.25mm) (All)	0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)	0
Hole Size Constraint (Min=0.025mm) (Max=2.54mm) (All)	0
Total	9

Clearance Constraint (Gap=0.25mm) (InNet('GND')),(All)
Clearance Constraint: (0.2mm < 0.25mm) Between Pad U1-8(-0.463mm,17.25mm) on Top Layer And Pad U1-9(-0.463mm,16.75mm) on Top Layer
Clearance Constraint: (0.225mm < 0.25mm) Between Track (-1.25mm,17.25mm)(-0.463mm,17.25mm) on Top Layer And Pad U1-9(-0.463mm,16.75mm) on Top Layer
Clearance Constraint: (0.225mm < 0.25mm) Between Track (-2.995mm,16.75mm)(-0.463mm,16.75mm) on Top Layer And Pad U1-8(-0.463mm,17.25mm) on Top Layer
Clearance Constraint: (0.159mm < 0.25mm) Between Pad U1-3(1.062mm,17.25mm) on Top Layer And Pad U1-5(0.55mm,17.762mm) on Top Layer
Clearance Constraint: (0.113mm < 0.25mm) Between Pad U1-4(1.062mm,17.75mm) on Top Layer And Pad U1-5(0.55mm,17.762mm) on Top Layer
Clearance Constraint: (0.238mm < 0.25mm) Between Track (1.062mm,17.75mm)(2.15mm,17.75mm) on Top Layer And Pad U1-5(0.55mm,17.762mm) on Top Layer
Clearance Constraint: (0.138mm < 0.25mm) Between Track (0.55mm,17.762mm)(0.55mm,19.7mm) on Top Layer And Pad U1-4(1.062mm,17.75mm) on Top Layer

Clearance Constraint (Gap=0.12mm) (All),(All)
Clearance Constraint: (0.113mm < 0.12mm) Between Pad U1-1(1.062mm,16.25mm) on Top Layer And Pad U1-12(0.55mm,16.237mm) on Top Layer
Clearance Constraint: (0.113mm < 0.12mm) Between Pad U1-10(-0.463mm,16.25mm) on Top Layer And Pad U1-11(0.05mm,16.237mm) on Top Layer